Telephone +41 33 522 10 40
Email office(at)billiardstore.ch
Opening hours
30 years' experience
Go to the homepage
CHF 0.00*

Cuetec Pool Cue Cynergy SVB Gen2, White LTW, 3/8x14, 12.5mm

Skip the photo gallery
High-quality billiards cue with a white shaft and a long, black, grained leather grip. Silver decorative rings with blue-green abalone inlays adorn the joints and the lower end. The glossy shaft contrasts with the texture.
Pool cue with a black, grained leather grip at the butt end. Silver trim, followed by delicate black and white crown designs and abalone inlays. The tip is smooth, predominantly white, and ends in a dark tip. Cuetec Cynergy SVB Gen2 White LTW Cue.
Cuetec Cynergy SVB Gen2 pool cue with black, grained leather grip and a silver ferrule with a small blue inlay. Black and white ten-point crown design with shimmering abalone inlays. White background.
Close-up of the lower section of an Cuetec Cynergy SVB Gen2 pool cue with a grained black leather grip. Wide silver ring engraved with the initials ‘SVB’. Black decorative band with abalone inlays. Black rubber butt cap.
Close-up of a white ' Cuetec ' Cynergy pool cue featuring the black signature 'Shane Van Boening'. Fine black lines and arrow-shaped embellishments accentuate the elegant, glossy design, which is beautifully showcased on the smooth epoxy resin.
Close-up of the Cuetec Cynergy SVB pool cue: textured black full-grain leather grip, silver decorative ring engraved with 'SVB', beneath which is a glossy black shaft and a black rubber butt cap with an opening for an cue weight.
Close-up of the rear section of an Cuetec Cynergy SVB Gen2 pool cue: black leather grip, silver ring with SVB logo and blue inlays. Visible threaded rod of the Acueweight Gen II system with the cap removed.
Cuetec 's black Cynergy SVB Gen2 pool cue shaft, with a diagonal pattern on a white background. The "Cuetec" logo at the bottom. A white tip with a red ring at the top. A red box at the bottom right indicating "12.5" as the tip diameter.
Cuetec ’s Cynergy SVB Generation II pool cues, one white and the other black, are being held. They feature ten-point crown designs with abalone inlays and grained leather grip tape. One hand is wearing a watch and a ring.
Shane van Boening, wearing a black ‘ Cuetec ’ T-shirt, sits with his hands folded. He talks about the further development of the Cynergy SVB Gen2 pool cues with an A-joint, leather grip and Clear-Tec epoxy resin coating. Quote visible.
Two Cuetec Cynergy SVB Gen2 pool cues, white and black, lie diagonally against a shimmering, abalone-like background. 10-point crown design, silver rings, abalone inlays, "Shane Van Boening". Smooth, glossy.
High-quality billiards cue with a white shaft and a long, black, grained leather grip. Silver decorative rings with blue-green abalone inlays adorn the joints and the lower end. The glossy shaft contrasts with the texture.
Pool cue with a black, grained leather grip at the butt end. Silver trim, followed by delicate black and white crown designs and abalone inlays. The tip is smooth, predominantly white, and ends in a dark tip. Cuetec Cynergy SVB Gen2 White LTW Cue.
Cuetec Cynergy SVB Gen2 pool cue with black, grained leather grip and a silver ferrule with a small blue inlay. Black and white ten-point crown design with shimmering abalone inlays. White background.
Close-up of the lower section of an Cuetec Cynergy SVB Gen2 pool cue with a grained black leather grip. Wide silver ring engraved with the initials ‘SVB’. Black decorative band with abalone inlays. Black rubber butt cap.
Close-up of a white ' Cuetec ' Cynergy pool cue featuring the black signature 'Shane Van Boening'. Fine black lines and arrow-shaped embellishments accentuate the elegant, glossy design, which is beautifully showcased on the smooth epoxy resin.
Close-up of the Cuetec Cynergy SVB pool cue: textured black full-grain leather grip, silver decorative ring engraved with 'SVB', beneath which is a glossy black shaft and a black rubber butt cap with an opening for an cue weight.
Close-up of the rear section of an Cuetec Cynergy SVB Gen2 pool cue: black leather grip, silver ring with SVB logo and blue inlays. Visible threaded rod of the Acueweight Gen II system with the cap removed.
Cuetec 's black Cynergy SVB Gen2 pool cue shaft, with a diagonal pattern on a white background. The "Cuetec" logo at the bottom. A white tip with a red ring at the top. A red box at the bottom right indicating "12.5" as the tip diameter.
Cuetec ’s Cynergy SVB Generation II pool cues, one white and the other black, are being held. They feature ten-point crown designs with abalone inlays and grained leather grip tape. One hand is wearing a watch and a ring.
Shane van Boening, wearing a black ‘ Cuetec ’ T-shirt, sits with his hands folded. He talks about the further development of the Cynergy SVB Gen2 pool cues with an A-joint, leather grip and Clear-Tec epoxy resin coating. Quote visible.
Two Cuetec Cynergy SVB Gen2 pool cues, white and black, lie diagonally against a shimmering, abalone-like background. 10-point crown design, silver rings, abalone inlays, "Shane Van Boening". Smooth, glossy.

Cuetec Pool Cue Cynergy SVB Gen2, White LTW, 3/8x14, 12.5mm

CHF 1,199.00

calendar.svg
Out of stock
This product is temporarily out of stock. However, it is usually back in stock within a week.

Quantity
Product number: 70079-710
GTIN/EAN: 0637962297492

Product information "Cuetec Pool Cue Cynergy SVB Gen2, White LTW, 3/8x14, 12.5mm"

PLAY LIKE A LEGEND

Designed and refined from the ground up – the second generation of the Cynergy SVB Series cues is here. Developed under the direct guidance of Hall-of-Famer Shane van Boening, these cues offer performance that surpasses even their stunning design. Key updates to the series include a repositioned A-joint, a Clear-Tec® epoxy resin coating, and a high-quality, grained full-leather wrap that runs seamlessly to the butt cap. Precisely cut rings with genuine abalone inlays highlight the shortened ten-point crown design – a fitting tribute to the undisputed king of American pool.

  • 10-point crown design with synthetic abalone
  • Silver, precision-cut rings with genuine abalone inlays
  • A+ Canadian maple core, kiln-dried
  • Clear-Tec® epoxy resin coating
  • Genuine, grained full-leather wrap
  • Cuetec Acueweight Generation II System
  • Duo Extension Ready Bumper
  • CT joint protectors
  • Cuetec shaft cleaning wipes
  • 3/8×14 Cuetec joint (21.30mm)
  • Tiger® Sniper laminated glue-on tip, 12.5 mm
  • Standard cue & shaft weight: approx. 19 oz (approx. 539 g)
  • Standard shaft weight: approx. 3.8 oz (approx. 108 g)
  • Standard butt length: 29" (approx. 73.7 cm)
  • Standard shaft length: 29" (approx. 73.7 cm)


 


THE WORLD'S BEST CARBON FIBRE CUE SHAFT

The relationship between a player and their cue is formed through feedback. It consists of thousands of tiny details, all interpreted by the player's senses: the sound of the hit, the depth and sight line on every practice stroke, the diameter and smoothness of the bridge as the shaft glides through it, the slight vibrations the player feels in their hand when the cue tip makes contact. Each of these interactions forges that relationship and builds trust between the player and their cue. With these factors in mind, Cuetec set out to develop the completely new line of Cynergy carbon fibre composite cue shafts.

“If I can't feel it, I can't use it,” was one of the first things five-time U.S. Open 9-Ball Champion Shane Van Boening said when we began talking about the development of Cynergy. Shane was right. Over the last ten years, the focus has been on percentages and equations to reduce deflection. Feel and the transmission of information to the player have been neglected.

Taking Shane's comments into account, Cuetec's engineers began developing a unique solution that uses the advantages of advanced carbon fibre manufacturing technology without compromising the feedback and touch that players have long associated with maple shafts. We are proud to say that after more than a year of testing countless prototypes, the fruits of that work have arrived in the Cynergy 12.5, 11.8 and 10.5 shafts. Shafts designed to enhance the connection between the player and their cue, with the added benefits of carbon fibre technology.

0 by 0 reviews

Rate this product!

Share your experiences with other customers.

Over 30+ years of experience

More than 500+ satisfied customers

Fast Delivery

Cookie preferences